(word processor parameters LM=8, RM=75, TM=2, BM=2) Taken from KeelyNet BBS (214) 324-3501 Sponsored by Vangard Sciences PO BOX 1031 Mesquite, TX 75150 There are ABSOLUTELY NO RESTRICTIONS on duplicating, publishing or distributing the files on KeelyNet except where noted! October 4, 1993 SCG.ASC -------------------------------------------------------------------- This interesting file shared with KeelyNet courtesy of Rick Anderson. -------------------------------------------------------------------- The following is a re-typed and edited version of a brief paper called "Space Curve Generator Overview", written by one James Watson, Jr., in 1985. There was no diagram of the device described herein, only the text. The paper came to me via a friend who received it at a local "UFO study group" meeting. I make no comments either in favor of or against the material presented here; I am simply sharing it with the rest of the BBS users for your own personal evaluation. -- R. Andersen, 9/24/93 -------------------------------------------------------------------- SPACE CURVE GENERATOR OVERVIEW The purpose of this paper is to acquaint the reader with the concept behind the Space Curve Generator. First the theory will be presented and then a description of the workings and construction of the machine. I would like to begin with a portion of a lecture delivered by Tesla to the IEEE on May 20, 1891. He said that the Ether surrounding the molecules is under a strain or in motion. The spinning of the molecules and their (entrained) Ether sets up Ether tensions or electrostatic strains; the equalization of Ether tensions sets up Ether motions or electric currents, and the orbital movements produce the effects of electro- and permanent magnetism. Another statement made in his paper, "The Problem of Increasing Human Energy", was that a stick of dynamite was like a "consumptive breath" in comparison to a capacitive discharge. It [capacitive discharge] produces the most powerful disturbance in the Ether known. This machine produces or takes advantage of this strain or stress and uses time as an advantage in prolonging the effects produced. The idea is that, when a capacitor is discharged, tremendous energy is realized for a very short period of time. This energy is in the form of BOTH voltage and current; whereas in an inductor both ARE NOT PRESENT on discharge. Page 1 Even though this discharge is in a pulsed condition it is fed into a circuit that takes the pulse and lengthens the time in which the power is realized. For instance, if we had a pulse of 12000 volts and 100 amps, this gives us a momentary power of 1.2 megawatts! Now even to the average observer the idea becomes clear in that, if there was a way to stretch this action out over a period of time, we would realize a tremendous amount of power for an input of 360 watts of power. The reader should be aware that this action takes place at the rate of 120 Hz, and the output of the device is at 60 Hz, so it avails itself to the conventional power transmission and means of utilization. The principal workings are as follows: First a source of outside power is needed to supply the original trigger feed to the system. This is fed into a step-up transformer and the result is a high-potential output. This in turn feeds a capacitive bank and stores the electricity in same. Next a single cap is made to momentarily discharge through a spark gap or a high-speed mercury interrupter. This impulse is a high potential - high current surge and in turn is fed through an inductor of very low resistance. This is in turn stepped down through a special transformer sequence to obtain a usable voltage. The current for the most part remains constant and may even climb. The extra energy is realized as a result of taking advantage of the first impulse of the capacitive discharge. ** (There may be pages missing here, as the next page seems to be the start of another brief paper.) ** The purpose of this paper is an attempt to explain the interaction of electrical currents and the harnessing of the same. If E=mc^2, and the charge on an object is a stress proportionate to the speed of light, then the vectoring of charge to current propagates at the speed of light. By defining current as Ether in motion, and not as charge in motion, then it will be understood that current and charge are separated by a definite angle of ninety degrees. The charge can be considered spatial or an incompressible stress on mass such as a hydrolic pressure, and this pressure is equivalent to the speed of light. The mass being compressible at the speed of light squared is therefore at half of its energy stress level. To explain more clearly: if the stress level were increased to the factor of the speed of light squared, then the mass would be converted to energy. Page 2 This over-stress level is most noticed in the permanent magnet, where this stress can be re-vectored into electric current by passing a conductor through the area of this stress. The stress (stressed Ether) is transferred to the conductor via an equalization effect created by high and low potential existing between the iron atoms and the copper atoms; therefore a current flow is produced. A point should now be made clear in that the stress in a magnetic field is not in the form of charge, but is rather in the form of orbital condition of the Ether. Where charge is a condition of the Ether and mass spinning in harmony, the magnetic or B field is the result of the orbital condition of the mass and Ether spin. The curious aspect is that the iron atom is the only mass that displays this naturally. If we could then take and build a condition in which the components of current and voltage equal the speed of light squared, and then vector this to total stress on the mass of the conductor, it in turn would release the stored energy of the mass itself. By then converting this released energy to both current and voltage we have increased our overall power output. Keeping in mind that a capacitive discharge is not only the most disruptive occurence in the Ether, but also creates a net stress on the same, it is seen that the capacitive medium not only stores stress but also the current is the first component to lead on discharge. As was mentioned earlier, if the resultant stress on the mass of the circuit were equal to the speed of light in that this stress was in the form of compressive stress on the mass, then an energy release would ensue. This action becomes evident upon the rapid discharge and opening of a capactive circuit timed within the first half of the first time constant, where voltage and current are at max for the given circuit. In this manner ENERGY MAY BE MINED from mass in a unique manner. James Watson, Jr. 12/30/85 --------------------- E N D O F P A P E R ---------------------- If you have comments or other information relating to such topics as this paper covers, please upload to KeelyNet or send to the Vangard Sciences address as listed on the first page. Thank you for your consideration, interest and support. Jerry W. Decker.........Ron Barker...........Chuck Henderson Vangard Sciences/KeelyNet -------------------------------------------------------------------- If we can be of service, you may contact Jerry at (214) 324-8741 or Ron at (214) 242-9346 -------------------------------------------------------------------- Page 3